Product Description
The STM32F030F4P6 is a Micro-controller Unit incorporates the high-performance ARM Cortex -M0 32-bit RISC core operating at a 48MHz frequency, high-speed embedded memories and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces, one 12-bit ADC, seven general-purpose 16-bit timers and an advanced-control PWM timer.
Features
- Memories:
- 16 to 64 Kbytes of Flash memory
- 4 to 8 Kbytes of SRAM with HW parity
Checking:
- CRC calculation unit
Reset and power management
- Voltage range: 2.4 V to 3.6 V
- Power-on/Power down reset (POR/PDR)
- Low power modes: Sleep, Stop, Standby
Clock Management
- 4 to 32 MHz crystal oscillator
- 32 kHz oscillator for RTC with calibration
- Internal 8 MHz RC with x6 PLL option
- Internal 40 kHz RC oscillator
Up to 55 fast I/Os
- All mappable on external interrupt vectors
- Up to 36 I/Os with 5 V tolerant capability
5-channel DMA controller
1 x 12-bit, 1.0 μs ADC (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Separate analog supply from 2.4 up to 3.6 V
Up to 10 timers
- One 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop
- One 16-bit timer, with up to 4 IC/OC, usable
for IR control decoding
- One 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop
- Two 16-bit timers, each with IC/OC and
OCN, deadtime generation, emergency stop and modulator gate for IR control
- One 16-bit timer with 1 IC/OC
- One 16-bit basic timer
- Independent and system watchdog timers
- SysTick timer: 24-bit down counter
Calendar RTC with alarm and periodic wake up from Stop/Standby
Communication interfaces
- Up to two I2C interfaces: one supporting
Fast Mode Plus (1 Mbit/s) with 20 mA current sink
- Up to two USARTs supporting master
synchronous SPI and modem control; one with auto baud rate detection
- Up to two SPIs (18 Mbit/s) with 4 to 16
Programmable bit frame
Serial Wire Debug (SWD)
Reviews
There are no reviews yet.