7Semi MC60 GSMGPRSGPS Arduino Shield – Quad-band

The EVE GSM and GPS Shield  allows an Arduino board to connect to the internet, make/receive voice calls, send/receive SMS messages and Location tracking. The shield uses a radio modem MC60 Quectel. MC60 is a quad-band full-featured GSM/GPRS/GNSS module. It is possible to communicate with the board using AT commands. The shield uses Arduinos digital pins 2 and 3 for software serial communication with the MC60.

The compact form factor, great positioning performance, low power consumption and Wide input voltage operating rage make the EVE GSM and GPS Shield the best choice for a wide range of M2M applications, such as automotive, telematics, asset tracker, pet tracker, and so on.

• Fully compatible with Arduino UNO R3, Arduino mega
• Supports any Micro SIM.
• High-efficiency power regulation.
• Wide input voltage operating range 7V to 28V
• GSM quad-band: 850/ 900/ 1800/ 1900MHz
• Multi internet protocols: TCP/UDP/FTP/PPP/HTTP/NITZ/NTP/PING/HTTPS/TCP/SSL/MQTT
• Optional Send/Receive AT commands over UART port is available
• Support Voice, SMS, QuecFOTA, DSSS and QuecOpen.
• Support Bluetooth SPP & HFP-AG profiles (BT 3.0)/
• Multi navigation constellation: GPS/ GLONASS/ Galileo/ BeiDou/ QZSS.
• GNSS receiver channels: 99 acquisition/ 33 tracking channels
• Working temperature range: -40C ~ 80C.

  Board Layout

  

  Board Dimensions

  

  Extra Information

  Brand:

  7Semi

  Dimensions:

  82.5 x 52 x 14 mm

  Power Supply:

  Operates through External supply 7V – 28V

  Micro Sim Card Connector:

  Yes

  Arduino Stackable Connector:

  2 x 8 pin,1 x 6 pin,1 x 10pin 2.54mm pitch

  External Power Connector:

  2-pin 2mm pitch JST Connector

  GNSS & GSM Antenna Connectors:

  2 x Right angle female SMA connector

  CR1220 SMD Battery Holder:

  CR1220 Button coin cell battery

  Audio Connector:

  3.5mm TRRS Audio Jack